A controlled approach to Chip-Off forensics
Chip-off is an invasive hardware-preparation method in which a semiconductor package is physically removed from a PCB for a laboratory’s separate downstream examination workflow.
PDR equipment controls the heating, removal and model-dependent handling stage. It does not read, decode or analyse memory, and successful removal does not guarantee usable data.
Why thermal control matters
Chip-off is a high-consequence procedure. The selected solder joints must release while the component, PCB and surrounding assembly remain within the laboratory’s validated process limits.
Focused Infrared top heating
Adjustable infrared directs energy towards the selected component without a forced hot-air stream across the target area.
Controlled PCB preheating
Preheating manages the wider board thermal mass and helps the laboratory develop a controlled heating cycle.
Model-specific sensing
Temperature feedback, sensing and handling differ by model. Stored profiles apply to the validated device and setup, not every board universally.
Visible, documented process
The working area and ThermoActive profile remain available to the operator during applicable stages of the procedure.
Sichtbare ErwärmungFokussierte Infrarottechnik am Zielbauteil
Fokussierte, einstellbare Infrarotstrahlung führt dem ausgewählten Bauteil Energie zu, während der Arbeitsbereich während des gesamten Verfahrens sichtbar bleibt.
TemperaturprofilBauteil- und PCB-Profile im Blick
Die ThermoActive-Software zeigt die Temperaturkurven von Bauteil und PCB live im Vergleich zum definierten Profil an und macht den thermischen Prozess sichtbar und wiederholbar.
Kontrollierte EntnahmeEntnahmeverfahren im Blick
Fokussierte Infrarottechnik erwärmt das ausgewählte Bauteil nach seinem definierten Profil, bevor es unter kontrollierten Bedingungen von der Platine aufgenommen wird.
Chip-off systems for your laboratory.
Chipmate
Der kontrollierte manuelle Einstieg in forensisches Chip-Off.
Compare ChipmateChipmate Pro
Professionelles Chip-Off und Chip-Transfer mit erweiterter Sensorik und Bauteilhandhabung.
Compare Chipmate ProChipmate Auto
Die höchste Stufe unterstützter Handhabung und Wiederholbarkeit der Baureihe.
Compare Chipmate AutoChip-off equipment scope.
What happens after removal?
The component moves to the laboratory’s validated reader, adapter and analysis software. Those downstream tools are separate from PDR equipment.
Does PDR recover the data?
No. PDR supplies the physical heating, removal and handling equipment; it does not extract, decode or analyse data.
Is one profile suitable for every device?
No. Profiles and temperature limits must be developed and validated for the particular device, board, component and laboratory procedure.
Which Chipmate model fits?
Chipmate is the controlled manual entry point. Chipmate Pro adds greater sensing, handling and alignment. Chipmate Auto adds the highest level of assisted handling in the range.
Demonstration, installation and training are available from PDR. Each laboratory remains responsible for validating its own procedure, device compatibility and downstream examination workflow.
Discuss your chip-off workflow
Tell PDR about the device types, laboratory process and level of handling or automation you need.