Chip-Off forensics

A controlled approach to Chip-Off forensics

Chip-off is an invasive hardware-preparation method in which a semiconductor package is physically removed from a PCB for a laboratory’s separate downstream examination workflow.

PDR equipment controls the heating, removal and model-dependent handling stage. It does not read, decode or analyse memory, and successful removal does not guarantee usable data.

Typical component packages
eMMC / eMCP
NAND Flash
UFS
CPU / SoC
Power IC
PMIC

Why thermal control matters

Chip-off is a high-consequence procedure. The selected solder joints must release while the component, PCB and surrounding assembly remain within the laboratory’s validated process limits.

Focused Infrared top heating

Adjustable infrared directs energy towards the selected component without a forced hot-air stream across the target area.

Controlled PCB preheating

Preheating manages the wider board thermal mass and helps the laboratory develop a controlled heating cycle.

Model-specific sensing

Temperature feedback, sensing and handling differ by model. Stored profiles apply to the validated device and setup, not every board universally.

Visible, documented process

The working area and ThermoActive profile remain available to the operator during applicable stages of the procedure.

可视聚焦红外加热

可视加热对目标元件进行聚焦红外加热

可调聚焦红外将能量施加到选定元件,工作区域在整个工序中始终可见。

PDR ThermoActive V8 实时加热曲线

加热曲线查看元件和 PCB 的温度曲线

ThermoActive 软件将元件和 PCB 的实时温度轨迹与设定曲线对照显示,使热工艺可视且可重复。

Chipmate Pro 受控元件拆取简明演示

受控拆取观看拆取过程

聚焦红外按设定曲线加热选定元件,随后以受控方式将其从电路板上拾取。

Practical answers

Chip-off equipment scope.

What happens after removal?

The component moves to the laboratory’s validated reader, adapter and analysis software. Those downstream tools are separate from PDR equipment.

Does PDR recover the data?

No. PDR supplies the physical heating, removal and handling equipment; it does not extract, decode or analyse data.

Is one profile suitable for every device?

No. Profiles and temperature limits must be developed and validated for the particular device, board, component and laboratory procedure.

Which Chipmate model fits?

Chipmate is the controlled manual entry point. Chipmate Pro adds greater sensing, handling and alignment. Chipmate Auto adds the highest level of assisted handling in the range.

Demonstration, installation and training are available from PDR. Each laboratory remains responsible for validating its own procedure, device compatibility and downstream examination workflow.

Discuss your chip-off workflow

Tell PDR about the device types, laboratory process and level of handling or automation you need.